How to Setup SmartBro Modem to a Router

This is my tut how to setup your SmartBro modem to a wired or wireless router.





Thing you need:

1. Modem (Smart Broadband)
2. Router (wired or wireless router)
3. Network adapters
4. Browser(Firefox / Chrome)

Follow Steps:

• Connect Smart Bro canopy antenna to your Computer
• Get the IP Address, MAC address, Subnet Mask, Default Gateway and DNS Server information.
• To Do this: go to “RUN” command and  type “ipconfig /all” then hit enter.
• Plug in your router, then turn it on.
• Connect your DLink Router to SmartBro modem using Ethernet cable.
• Connect the Ethernet RJ45 Network Cable to your PC from one of the LAN ports of your router.
• Open the router’s administration tool: Type “http://192.168.1.1″ or “http://192.168.0.1″to your browser.
• The router’s home page will ask you for a username and password. Both are provided in the router’s documentation. Or Try this User: admin Password: 1234 or Username: (leave it blank) Password: admin. 
• Now go to WAN Setup then choose Static IP. Fill up all the information in the page (the info you gathered in step 2) then hit Apply; Now your router will reboot automatically.
• Then open your web browser and visit any website just like this http://infotechmaestro.blogspot.com  {to check if your smart bro connection is working}
• Lastly, you configure an additional network security features and change the default administrator password.     

Reminders:

 

Be sure all router's connection are tightly  connected.
Also you can use CLONE MAC (If you want not to be directed in your Portal) 

About the Author :

is a full time Tech Blogger | Web Designer, Founder and Editor in Chief of INFOTECHMAESTRO